Concreting in Brisbane in 2026 typically costs $65–$120 per square metre for a standard concrete driveway or slab, depending on the concrete type, thickness, and finish required. Decorative options like exposed aggregate and coloured concrete push prices higher.
Concrete work over $3,300 in Queensland must be performed by or under the supervision of a QBCC-licensed contractor. Verify the licence before hiring.
Concreting Prices in Brisbane (2026)
| Job Type | Typical Cost per m² |
|---|---|
| Standard concrete driveway | $65 – $90 per m² |
| Exposed aggregate driveway | $85 – $130 per m² |
| Coloured/decorative concrete | $90 – $140 per m² |
| Concrete path or footpath | $50 – $80 per m² |
| Concrete slab (shed/garage) | $75 – $120 per m² |
| Concrete pool surrounds | $90 – $150 per m² |
| Concrete steps (per step) | $250 – $500 per step |
| Removal of existing concrete | $50 – $100 per m² |
What Affects the Cost of Concreting?
Concrete Thickness and Strength
Standard residential driveways use 100mm thick concrete with a 25MPa mix. Driveways that need to support heavy vehicles (trailers, caravans) should use 32MPa mix at 125mm thickness — expect to pay 10–15% more.
Site Preparation
Excavation, levelling, compaction, and formwork are often not included in per-m² rates. Get a full scope quote that includes site prep, reinforcement (mesh or reo), and disposal of spoil.
Decorative Finishes
Exposed aggregate (where the surface stone is revealed) and broom-finish concrete are popular in Brisbane. Stamped and stencilled concrete costs more again but provides a tile-like look without the maintenance. Honed concrete (ground smooth) is popular for alfresco areas.
Access and Pump Costs
If a concrete pump truck is needed to reach the pour site, add $600–$1,500 to the total. This is common for backyard slabs or where truck access is limited.
Typical Driveway Cost Example
| Item | Cost |
|---|---|
| Excavation and base prep (40m²) | $800 – $1,500 |
| Formwork and mesh | $400 – $700 |
| Concrete supply and pour (40m²) | $2,600 – $3,600 |
| Finishing and sealing | $400 – $800 |
| Total (40m² standard driveway) | $4,200 – $6,600 |
Questions to Ask Before Hiring
- Is the quote fixed-price and does it include site prep, mesh, and disposal?
- What concrete mix (MPa) and thickness will be used?
- Is a pump truck required and is it included?
- How long is the curing period before the driveway can be used?
- Is a sealer applied, and is it included in the price?
- Does the contractor have QBCC licence and public liability insurance?
Concrete cannot be poured in extreme heat (above 35°C) without special precautions. Scheduling your pour in the cooler months (May–September) can reduce cracking risk and may be cheaper due to lower demand.
Get Quotes from Verified Concreters
Post your concreting job on Taskova. QBCC-verified concreters will quote your job, and payments are held in milestone escrow — you only pay when you're satisfied with each stage of work.